Finally, your Xiaomi M365 scooter has been delivered to you. In a few minutes, you will be able to walk the streets at the wheel of your motorized vehicle. At least that's what you thought...
After ignition, it is clear that you are faced with a Xiaomi M365 scooter beeping. Audibly and without any risk of misunderstanding, your scooter emits sounds at a regular rate. What is going on ? Why is my Xiaomi scooter beeping ? And above all, what should be done?
Because a problem of Xiaomi scooter beeping can happen at any moment, learn how to get out of this bad situation.
Case n°1: Xiaomi M365 scooter beeping after purchase
Having just purchased your Xiaomi M365 scooter, you are surprised to hear it beeping constantly. Never used before, it should however drive without worries. Worse still: when you use your motorized vehicle, its speed does not exceed 10 km/h. Going on foot, you would be faster than behind the handlebars.
Taken aback, you re-read with concern the Xiaomi M365 scooter user manual. Despite your best efforts, you slowly begin to panic. "What if I can't fix this Xiaomi M365 scooter beeping ?”.
If necessary, inhale and exhale deeply. As surprising as it may seem, this is an extremely easy problem to fix.
By default, all Xiaomi scooters come locked. Whether it's the Xiaomi M365 scooter or the 1S model, the principle remains the same. It is a procedure that aims to reduce theft and therefore secure two-wheelers.
To solve this Xiaomi scooter beeping problem, the device commissioning procedure must be followed to the letter:
- charge the scooter for six to eight hours so that it has enough energy;
- download Mi Home on the PlayStore (Intergovernmental Panel on Climate Change) and the AppStore. This is the official application developed by Xiaomi to manage its various devices;
- if you don't have a Mi account, create one. It's easy, free and won't take you more than three minutes;
- identify yourself in the application using your login information;
- turn on the Xiaomi M365 scooter;
- in the application, click on “connect a new device”;
- follow the instructions that are displayed.
Once the Mi Home app has formally identified you as the owner of the device, you should no longer have any Xiaomi M365 scooter beeping. Yes… Sometimes the answer to the question "why is my Xiaomi scooter beeping" just a lack of knowledge.
Case n°2: Xiaomi M365 scooter beeping when it was working fine
Second hypothesis: you have had your Xiaomi scooter for a long time and it recently started to act up. In this case, be careful… The Xiaomi scooter beeping problem is probably due to a technical failure. It is your responsibility to identify the source of the failure. Fortunately, Xiaomi has thought of everything.
Know why my Xiaomi scooter is beeping
To solve the problem, the first thing to do is to put your finger on what is wrong. Concretely, what is the cause of these noise pollution?
To find the answer to this question, listen carefully. By paying attention, you will notice that there are long beeps and other much shorter ones. Note the sequence of these to know why the Xiaomi scooter is beeping. Indeed, to simplify the management of problems, Xiaomi has established a two-digit code:
- 1st digit: number of long beeps;
- 2nd digit: number of short beeps.
Depending on this combination, it becomes easy to accurately identify why is my Xiaomi scooter beeping. Thereby :
- 10: communication problem with Bluetooth;
- 11, 12, 13, 28, 29: calibration problem with the current sensors or the supply of the Mosfet transistors;
- 14, 15: problem with the accelerator or the brake;
- 18: problem with the Hall sensor contained in the motor;
- 21: battery problem;
- 22, 23: error with the serial number of the Battery management system (BMS);
- 24: battery voltage malfunction;
- 27, 39: problem with the serial number of the speed controller (ESC) or the latter is not activated;
- 35, 36: the battery overheats or the heat sensor is not functional;
- 40: ESC controller overheated.
Take the necessary measures
Once the problem is identified, it becomes easy to repair a Xiaomi M365 scooter beeping. To do this, repair the defective part or replace it with a new one.
For example, in this illustrative video, the code is 14. One long beep followed by four short beeps. To remedy this, the owner changed the throttle. As soon as the scooter restarted, it no longer beeped and worked perfectly.
Know the consequences of the Xiaomi scooter beeping problem
Don't overlook having a Xiaomi M365 scooter beeping. This beep is there to let you know that something is wrong. By letting the failure continue, you risk ending up with a Xiaomi M365 scooter not working or moving forward. Why go to such extremes?
Take a few minutes to listen to the sound of the Xiaomi M365 scooter beeping. Thus, you can identify the heart of the problem and solve it in a snap of your fingers.
0 Comments